0

Your Cart is Empty

SilverTip Hardener

SilverTip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It will outperform any other product in these applications. SilverTip Epoxy is designed for use with fiberglass, Kevlar®, Dynel® and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air.

Both the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. SilverTip Epoxy cures to a brilliant blush-free film with either the fast or slow hardener eliminating secondary bonding concerns as experienced with other epoxies. The working time is longer than most boat building epoxies without extending cure time. The cured film is tough and resilient with better heat resistance than other epoxies cured at room temperature.

Description

SilverTip Hardener

SilverTip Epoxy is a crystal clear, blush-free epoxy system. SilverTip Epoxy is an excellent choice for brightwork applications due to its brilliant clarity and rapid film build characteristics.

Due to its low viscosity, SilverTip wets out a variety of reinforcement materials with ease. These materials include fiberglass, Kevlar®, Dynel®, and carbon fiber. SilverTip has a high modulus and therefore develops rigidity without brittleness. The cured film is tough and resilient, with good heat resistance. It features an easy 2:1 by volume mix ratio.

Features

• A slow or fast hardener to meet your specific needs

• Superior defoaming properties with little tendency to float the fabric

• Can be recoated without sanding within 72 hours

• Cures without forming an amine blush with either the fast or slow hardener

• Contains no VOC

• Compatible with most 1 or 2 part marine primers, paints, and varnishes

• Easy 2:1 mix ratio

Properties


What is the SilverTip Series?

The SilverTip Series Products


Engineered for Any Project


Frequently Asked questions