System Three: Products Index

System Three Products Index

Scroll this window for a quick overview of our product line.

	About The SilverTip Marine Epoxy Series The SilverTip Marine Epoxy Series from System Three Resins is made up of five, application specific products, designed to make wooden boat building easier and more enjoyable as well as perform better than any other epoxy available today. Gone is the mess and inconsistency of repeated measuring and mixing of powdered fillers. No more blushing and worries about secondary bonding. The SilverTip Marine Epoxy Series represents the most significant advancement in wood and composite boatbuilding in 30 years, incorporating the very latest in composites technology. > Find out more
	System Three u-TAH™ Cartridge Simplicity in epoxy adhesive use has finally arrived! Just drop System Three's new cartridge into a standard size caulking gun, add a mixer tip and squeeze and apply. What could be easier? Only need a little bit and don't want to use a tip? Then squeeze out some into a cup, mix and apply. In either case the cartridge properly measures the resin and hardener and can never get the ratio wrong. After you're done put the cap back on and the cartridge is ready to go whenever you next need it. > Find out more
	SilverTip Laminating Resin An optimized, non-blushing, epoxy resin system for coating bare wood and saturating reinforcing fabric in wood-composite boat construction and repair. Also ideal for gelcoat blister repair and general restoration of fiberglass boats. > Product Detail Page
	SilverTip EZ-Fillet The ideal epoxy wood flour putty for creating smooth, exceptionally strong, reinforcing and cosmetic fillets as used in stitch and glue plywood boats construction. > Product Detail Page
	SilverTip GelMagic Non-sagging, gap-filling, toughened epoxy adhesive, ideal for stitch and glue, plywood, strip built and glued lap strake boat construction. > Product Detail Page
	SilverTip QuikFair QuikFair is a light-weight, microballoon-filled, fast-curing two-part epoxy fairing putty with excellent moisture resistance. >Product Detail Page
	SilverTip MetlWeld MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel to wood. MetlWeld exhibits excellent elastic properties and superior bond strength while remaining rigid. MetlWeld will bond to stainless steel, galvanized steel, aluminum, copper, glass, ceramic, neoprene rubber and most porous surfaces. > Product Detail Page
	SilverTip Yacht Primer SilverTip Yacht Primer is a high-build, anti-corrosive, sandable epoxy primer, which thins and cleans up with water. > Product Detail Page
	EndRot™ Kit The Preservative and Epoxy Wood Restoration System. > Product Detail Page
	SculpWood Moldable, carvable, sandable epoxy putty for replacement of damaged wood. > Product Detail Page
	RotFix Easy-to-use-, low viscosity-, epoxy- wood consolidation product. > Product Detail Page
	Impel Rods Impel rods are an easy to use, low cost, EPA approved treatment for the protection of wood from insects and fungal decay. Impel Rods are molded from fused, water diffusible borates which are internationally recognized as an effective wood preservative. In this fused form, borates are released slowly over time and only as needed, providing long-term protection. In most cases, with proper maintenance, wood decay and insects can be completely eliminated and kept from coming back. > Product Detail Page
	Board Defense Board Defense is an EPA registered insecticide, termiticide and fungicide concentrate for the control of wood destroying insects and rot. It is a white powder that comes ready to use as a dust or it can be mixed with water for better penetration. Board Defense can be applied directly to the wood surface as well as soaked into insect galleys or pre-bored holes and will effectively kill all existing rot and most wood-eating insects that contact it. > Product Detail Page
	MirrorCoat® Self-Leveling epoxy resin coating for use on tables, bars, and countertops. Cures to a glossy, smooth surface, which is stain-resistant and waterproof. > Product Detail Page
	Clear Coat Low-viscosity water-white, "penetrating" epoxy, ideal for sealing wood and other porous surfaces. Use for all marine and woodworking applications where a waterproof coating is desired. > Product Detail Page
	Quick Cure 5 Quick cure is a fast setting, two part epoxy adhesive with excellent bond strength and is highly water resistant. > Product Detail Page
	SB-112 Clear, almost water-white high modulus epoxy resin, originally formulated for building surf and sail boards over polystyrene foam cores. Unique in that polyester resin and gelcoat will bond to it as a "tie-coat." > Product Detail Page
	System Three General Purpose Epoxy Resin A 100% solids, medium modulus epoxy system, fitting well into 90% of all epoxy applications. Use at a simple 2:1 ratio with any of the three hardeners. > Product Detail Page
	T-88 For well over 30 years T-88 has been the most widely used structural adhesive for homebuilt aircraft and marine applications in the United States. Mixed at a 1:1 ratio, T-88 will cure at temperatures as low as 35°F. > Product Detail Page
	Spar Urethane Varnish We formulate this for complete compatibility with System Three products to ensure proper varnish cure when applied over epoxy resin. A VOC-compliant, high-gloss, marine varnish which contains UV-absorbers for added durability. > Product Detail Page
	WR-LPU WR-LPU is a highly durable 2-part polyurethane topcoat, which thins and cleans up with water. > Product Detail Page
	Back to Top System Three is a registered trademark of System Three Resins, Inc. u-TAH is a trademark of TAH Industries, Inc.