MetlWeld Metal Bonding Epoxy,
part of the SilverTip Marine Epoxy Series
MetlWeld is a toughened epoxy adhesive designed to bond metal and
other dissimilar materials such as stainless steel, galvanized
steel, aluminum, copper, glass, ceramics, neoprene rubber and most
porous surfaces. It will cure at temperatures as low as 15°C.
MetlWeld is supplied at the correct application consistency so
no additional fillers or bulking agents are needed to make it a
non-sagging adhesive.
Recommended Uses:
MetlWeld will bond metals to metal, wood, stone, concrete, and
even glass.
Application:
Surfaces to be bonded should be freshly sanded and clean of grease,
wax, oil and other contaminants. At 25°C allow 48 hours
to cure and develop strength (longer at cooler temperatures)
before subjecting to stress.
 |
Package
Sizes:
(Each kit contains 1-part resin and 1-part hardener)
Half-pint kit (1200K10)
Pint kit (1200K14)
Quart kit (1200K16)
Half-gallon kit (1200K20)
Two-gallon kit (1200K50)
Ten-gallon kit (1200K60)
8.4oz Universal Cartridge (1200K91)
Available Colors:
Gray |
Comments:
For health and safety information concerning this product, please
refer to the
Material Safety Data Sheet (MSDS) for this product. Click
here for the MSDS section of our website.
Back To Top |
