SilverTip Laminating Resin
SilverTip Laminating Resin is a medium-low viscosity, liquid epoxy
resin system that has been optimized for coating and reinforcing
fabric saturation in wood-composite boatbuilding. It will outperform
any other product in these applications. SilverTip Laminating
Resin is designed for use with fiberglass, Kevlar, Dynel and
graphite as well as on bare wood. It has superior wet-out characteristics
with little tendency to foam or trap air. Both the resin and
hardener are nearly colorless and are used in an easy 2:1 volumetric
ratio. SilverTip Laminating Resin cures to a brilliant blush-free
film with either the fast or slow hardener eliminating secondary
bonding concerns as experienced with other epoxies. The working
time is longer than most boat building epoxies without extending
cure time. The cured film is tough and resilient with better
heat resistance than other epoxies cured at room temperature.
Fillers, wood flour, and bulking agents can be combined with
SilverTip Laminating Resin, however, we suggest using the other
members of the SilverTip Series for adhesive, filleting and fairing
applications.
Recommended Uses:
SilverTip Laminating Resin has been formulated as an optimized
system for coating and fiberglassing wooden boats, the repair of
fiberglass boats and for use with carbon fiber sporting goods & autobody
parts.
Application:
Use at a simple 2:1 volume ratio with either the fast or slow hardener.
Use at temperatures as low as 35ºF with no limitations on humidity.
Even at lower temperatures and higher humidity this resin will
not blush on curing. The medium-low viscosity of SilverTip Laminating
Resin wets out fiberglass cloth quickly and allows for use "as
is" for either coating or fiberglass work.
 |
Package
Sizes:
Pints (hardeners only)
Quarts
Half-Gallons
Gallons
2.5 Gallons
5 Gallons
|
Comments:
For health and safety information concerning this product, please
refer to the
Material Safety Data Sheet (MSDS) for this product. Click
here for the MSDS section of our website
Back To Top
System Three is a registered trademark of System Three Resins, Inc. |
