System Three u-TAH™ Cartridge
We offer the following products: QuickCure 5, T-88 Structural Adhesive and SilverTip GelMagic in the u-TAH Cartridge. QuickCure 5 is our quick setting epoxy adhesive. With QuickCure 5, you will have 2-3 minutes of working time and your joint will be tack free in 5-minutes. Our structural epoxy adhesive, T-88, is also available in cartridges for jobs that require longer pot life and overnight cure. If your application requires a sag-resistant adhesive, SilverTip GelMagic is for you.

With the u-TAH Cartridge there is never any need to measure the part A and the part B. The dual chambered cartridge does that for you and the Mixing Tips blend the resin and hardener as the product is dispensed. There is never any need to mix. If you’d prefer to dispense into a cup or other mixing vessel, use our convenient Ratio Check Cap (great for dispensing small quantities).

If you have never applied epoxy products with a dispensing gun you will be amazed when you try our new u-TAH Cartridge. It takes all the measuring and mixing out of the process of using epoxy. All you have to do is point and shoot. The mixing tip will put the precise amount of epoxy exactly where you want it with no mess and minimum waste.

Comments:
For health and safety information concerning this product, please refer to the
Material Safety Data Sheet (MSDS) for this product. Click here for the MSDS section of our website

Back To Top

System Three is a registered trademark of System Three Resins, Inc. u-TAH is a trademark of TAH Industries, Inc.