RotFix

RotFix is chemically formulated to cure over damp substrates. Best results are achieved by removing the wet, punky wood from the repair area. If the wood is visibly wet after removing the punky material, use a hair dryer or heat gun to further dry the substrate.

SculpWood Putty can be applied over the RotFix immediately, or up to 72 hours later without sanding. A wet-on-wet application of the SculpWood to the RotFix is encouraged to obtain a strong bond. There is, however, no detriment to applying the SculpWood later in time. If the RotFix has cured longer than 72 hours, degloss the surface with sandpaper or a soft, flexible abrasive pad. Apply fresh RotFix, followed by the SculpWood Putty.

When the Resin (Part A) and Hardener (Part B) are mixed, they start to cure through a chemical reaction that produces heat. When left in too large a volume, this reaction can start to accelerate, leading to premature curing and excessive heat. To avoid this issue, pour out the product soon after mixing into a larger working container. This spreads the volume out, reducing heat buildup. Additionally, it's best to start with a small batch. You can always increase the batch size if necessary.