Cold Cure, 1.5-Gallon Kit
|
|
|
|
Cold Cure, 1.5-Gallon Kit
|
|
SKU: F1000K46
Weight: 17 lbs
Cold Cure may be used effectively down to 35°F in 100% relative humidity. It is an easy to use 2:1 ratio. It will not blush or turn milky in thin films and cures overnight. Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system. Cold Cure has no VOCs. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue. Cold Cure is clear and is compatible with most paints and clear finishes. When cured it can be machined, drilled, sanded and tapped. Cold Cure is a corrosion resistant coating, sealer and laminating resin.
|
|
|
|
|
|
|
May we also suggest...
|
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. ( ) indicates a required accessory.
|
|
|
|
|
|
|
