Cold Cure

Cold Cure is a blush resistant, two-part epoxy laminating and coating resin that excels in foul weather conditions.  It cures in cold, damp, and humid environments while remaining resistant to water spotting.

Use it in marine and woodworking applications.  Cold Cure can be mixed with various fillers to create filleting and fairing compounds for marine applications.  Adding silica thickener produces a general duty woodworking adhesive.

Description

Cold Cure

Cold Cure is a blush resistant, two-part epoxy laminating and coating resin that excels in foul weather conditions. It cures in cold, damp, and humid environments while remaining resistant to water spotting.

Use it in marine and woodworking applications. Cold Cure can be mixed with various fillers to create filleting and fairing compounds for marine applications. Adding silica thickener produces a general duty woodworking adhesive.

Features

• Cures in cold, damp conditions down to as low as 35°F (2°C)

• Compatible with most primers and paints

• Contains no VOC

• Chemical resistant

• Features a convenient 2:1 mixing ratio

Properties


We make coatings that perform.

Coatings


Product Highlights

Coatings in Action


Coatings FAQ

Cold temperatures will slow down the epoxy reaction and in the extreme cold, the reaction can stop altogether. The gel time and full cure time will be extended in cool temperatures. All of our published gel times are based on a room temperature cure of 77 deg F (25 deg C), a general rule of thumb is that for every 18 deg F (10 deg C) drop in temperature, the gel time is doubled. Some epoxies can develop an amine blush when applied in cooler temperatures as well.

The most common question we receive is when a customer wants to work on a project in the cooler months and the temperatures will drop below the product application temperatures at night. In these cases, we recommend applying the epoxy in the warmest part of the day when temperatures will be above the working temperature for as long as possible. When applied this way, most of the reactions can take place as intended. The final part of the reaction will resume when the epoxy warms back up in subsequent days. If an amine blush develops, an extra step of washing the coat with warm, soapy water before moving on to subsequent coats, will be required. Also, the extended gel time can lead to a greater chance of dust and other debris settling into the coat.

If the initial temperature is below the recommended application temperature, or if the temperature is not expected to warm back up in the following days, we suggest utilizing a hardener that is formulated for cold conditions (#1 Fast, SilverTip Fast, Cold Cure, T-88).

Homebrewing your own epoxy compounds instead of using the SilverTip line of ready-to-use epoxy compounds involves mixing various fillers into a mixed batch of one of our liquid epoxies. Below are some guidelines for creating common compounds using System Three General Purpose Epoxy, Cold Cure, SilverTip Epoxy, Clear Coat, and SB-112 Liquid epoxies.

Adhesives:

1 cup of Silica Thickener to 6 oz of mixed epoxy.

or

3/4 cup of Wood Flour to 6 oz of mixed epoxy.

Fairing Compound:

1/2 cup of Silica Thickener + cup of Glass Microspheres to 6 oz of mixed epoxy.

Filleting Compound:

1 cup of Wood Flour to 6 oz of mixed epoxy.

Playdough-like Putty:

3 cups of Glass Microspheres to 6 oz of mixed epoxy.

For further detail on mixing and applying compounds, please refer to the System Three Epoxy Book.

Cold Cure is uniquely formulated to cure in cold and damp conditions. Cold Cure can be applied in temperatures down to 35° F (1°C) and will cure to its full properties even in damp and humid conditions. Cold Cure can also be modified with fillers to make all types of epoxy compounds.