SilverTip Yacht Primer
SilverTip Yacht Primer is a waterborne, two-part epoxy coating specifically formulated as a tough, below-the-waterline primer for marine topcoats. Though the Yacht Primer was specifically designed for use with System Three WR-LPU and Yacht Enamel, it is compatible with most commonly available marine topcoats. It applies easily over fiberglass and carbon laminates, polyester or epoxy resin surfaces, and properly prepared wood, metal, and cementitious surfaces. In addition, it provides a smooth base for topcoating over epoxy or vinyester barrier coats.

Yacht Primer offers performance equal to its solvent-borne counterparts, in corrosion protection, film-build, and sandability. In addition, it is non-flammable and contains no highly-hazardous (HAPS) solvents or heavy metals.

SilverTip Yacht Primer can be applied by brush, roller, or spray. For spray application, HVLP equipment is recommended. Yacht Primer offers corrosion protection over aluminum or steel, but contains no heavy metals. When cured, it sands easily to a hard, smooth surface, to help give a high-performance topcoat, like WR-LPU, the best appearance. Detailed application instructions are available in the System Three Paint Application Guide.

Package Sizes and Colors: (Each kit contains 1-part resin and 4-parts hardener) Gray, Quart kit (1710K16) Gray, Gallon kit (1710K24)

Comments:
For health and safety information concerning this product, please refer to the
Material Safety Data Sheet (MSDS) for this product. Click here for the MSDS section of our website

Back To Top

System Three is a registered trademark of System Three Resins, Inc.