WR-155 Epoxy Primer
WR-155 Primer is a high-build, waterborne two-part epoxy primer
specifically formulated as a sandable base for System Three Resins’ topcoats.
WR-155 contains corrosion inhibitors and is opaque and lead-free.
It will provide performance equal to its solvent-borne counterparts,
in corrosion protection, film-build and sandability. In addition,
it is non-flammable and contains no hazardous air pollutant solvents
(HAPS) or heavy metals. It is low VOC and cleans up with water.
Recommended Uses:
WR-155 Primer may be used over polyester or epoxy resin surfaces,
and properly prepared wood, metal, and cementitious surfaces. Use
the primer to provide a smooth, uniform surface for the System
Three polyurethane WR-LPU Topcoat. Additionally, it may be used
to help poor hiding topcoats look uniform and opaque.
 |
Package
Sizes and Colors:
(Each kit contains 1-part resin and 4-parts hardener)
White, Quart kit (1700K16)
White, Gallon kit (1700K24)
Gray, Quart kit (1701K16)
Gray, Gallon kit (1701K24) |
Comments:
For health and safety information concerning this product, please
refer to the
Material Safety Data Sheet (MSDS) for this product. Click
here for the MSDS section of our website
Back To Top |
