Call Us

Products

Other Links

SilverTip MetlWeld
MetlWeld

Find a dealer near you:

Retail Dealer Locator

We are always expanding our distribution; however, if we don't have a dealer in your area, please call us at 1-800-333-5514.

SilverTip MetlWeld Product Literature PDFs:



SilverTip MetlWeld

MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel to wood. MetlWeld exhibits excellent elastic properties and superior bond strength while remaining rigid. MetlWeld will bond to stainless steel, galvanized steel, aluminum, copper, glass, ceramic, neoprene rubber and most porous surfaces. For use in high stress applications when bonding metals to materials such as glass, composites, wood and concrete.


  • • 100% waterproof.
  • • Will not shrink upon curing; fills large gaps without loss of strength.
  • • Features a convienient 1:1 mixing ratio.
  • • Superior adhesion to brass, copper, bronze, aluminum, galvanized, stainless and mild steel, glass, wood, composite and most porous materials.
  • • Forms permanent, non-brittle bonds with high impact and creep resistance.
  • • Cures reliably at temperatures as low as 50°F.
Product Uses:
Use MetlWeld for metal to metal, metal to wood and for bonding other dissimilar materials like stone, concrete, ceramics and even glass. MetlWeld does not bond well to thermoplastic materials like polyethylene, polypropylene, nylon, Delrin®, PVC, etc. Testing is always prudent if there is any question about the materials being bonded.
Surface Preparation:
Surfaces to be bonded should be freshly sanded and clean of grease, wax, oil and other contaminants. At 77°F allow 48 hours to cure and develop strength (longer at cooler temperatures) before subjecting to stress.

Available Colors:

Gray

Comments:

For health and safety information concerning this product, please refer to the Material Safety Data Sheet (MSDS) for this product. Click here for the MSDS section of our website.

MetlWeld

Physical Properties:
  • Mix Ratio by Volume: 100:100
  • Mix Ratio by Weight: 100:91
  • Total Solids: 100%
  • Mixed Viscosity: 9,000 cps
  • Mixed Color: Gray
  • Coverage (20mil Glue Line): 80 ft2/Gal (2m2/L)
  • Minimum Application Temperature: 50°F (10°C)
  • Maximum Service Temperature (continuous use): 125°F
  • Lap Shear Strength:

Aluminum to Aluminum, psi: 2,150

Cold-Rolled Steel: 2,240

Brass: 1,800

T-Peel Strength, PLI: 28

  • Gel Time @ 77°F (25°C): 30 Minutes (100g mixture)
  • Tack Free Time @ 77°F (25°C): 8 Hours



  SKU Description Price Qty
  1200K10
$23.25
  1200K14
$31.65
  1200K16
$51.80
  3810S16
$43.50
  3800S16
$51.00

SHOPPING CART ITEMS: 0

Sub Total USD: $0.00

View Cart | Checkout