SilverTip Yacht Primer

Product Description

SilverTip Yacht Primer is a waterborne, two-part epoxy coating specifically formulated as a tough, below-the-waterline primer for marine topcoats. Though SilverTip Yacht Primer was specifically designed for use with System Three WR-LPU, it is compatible with most commonly available marine topcoats. It applies easily over fiberglass and carbon laminates, polyester or epoxy resin surfaces, and properly prepared wood, and cementitious surfaces. In addition, it provides a smooth base for topcoating over epoxy or vinyester barrier coats. Yacht Primer offers comparable performance to its solvent-borne counterparts, in film-build and sandability. In addition, it is non-flammable and contains no highly-hazardous (HAPS) solvents or heavy metals.

SilverTip Yacht Primer can be applied by brush, roller, or spray. For spray application, HVLP equipment is recommended. When cured, it sands easily to a hard, smooth surface, to help give a high-performance topcoat, like WR-LPU, the best appearance.

  • Easy to apply by brush, roller or sprayer.
  • Use above or below the waterline.
  • Performance comparable to solvent-borne counterparts.
  • Thins and cleans up with water.
  • Low VOC formula requires no special handling or storage.
  • Long 3 hour pot life.
  • No sanding required before topcoat or bottom paint application.
  • Easily sands for smoother topcoat appearance.
Size
$ 49.95
Mix Ratio by Volume1:4
Total Solids by Volume36%
Total Solids by Weight52%
Mixed Viscosity (Krebs Units)75-80 KU (900 - 1,000 cps)
Mixed ColorLight Gray
CoverageWet Film Thickness @ 4.5 - 6.5 mils: 250 - 350 ft2/gal
Dry Film Thickness @ 1.5 - 2.5 mils: 250 - 350 ft2/gal
Minimum Application Temperature55°F (13°C)
Pot Life @ 77°F (25°C)3 Hours
Re-Coat Time @ 77°F (25°C)2 Hours minimum
Full Cure @ 77°F (25°C)24 Hours
VOCs<200 g/L

Related Products