If you have ever replaced a 4x4" fence post, then you know what a tremendous hassle it can be. The potential for rot and insect damage can now be virtually eliminated with our handy preservation kit. Make your posts last longer with our handy preservation kit.
Contents:
6 - 2" x 1/2" Bor-8 Rods
6 - 1/2" Plugs, Black
If you've ever replaced a 4x4 fence post then.... you know.
What you didn't know is that posts susceptible to wood rot can be protected with the simple placement of a borate rod an inch above ground level.
The EndRot System is a group of products developed for use in the repair of architectural wood components that have been damaged by rot fungus, insects, extreme weathering and abuse. Each product in the EndRot System can be used separately. When used together they are a complete and permanent solution for repairing damaged wood. When repaired with the EndRot System, wood is as good as new, ready to prime and paint.
Excavate Punky Wood / Apply EndRot Borate Powder
Typically, rotted wood contains a significant amount of moisture. Removing the punky, rotted wood is an essential first step in the process.
In addition to removing unsound wood, it's also important to address the underlying problem. Treat the wood with EndRot Borate Powder to kill fungus and destroy the wood as a food source for insects.
Apply RotFix Penetrating Epoxy
Apply RotFix penetrating epoxy within 5-10 minutes of mixing in order to seal the wood.
Brush a generous coat of RotFix over the affected area. Some wood substrates are very porous and will absorb the RotFix rapidly. A second coat may be necessary. More epoxy can be applied over wet or tacky RotFix.
Apply SculpWood Putty / SculpWood Max Putty / Sculpwood Paste
Now it's time to replace the rotten wood that we removed. From small cracks to large voids, and from cosmetic to structural repairs, the SculpWood family of products has you covered.
With easy 1:1 mix ratios, simply mix up an appropriate amount of putty or paste to slightly overfill the area before coming back the next day to sand, prime, and paint. Good as new!
You asked, and we listened. Our EndRot System now includes a putty to address your most challenging needs.
With SculpWood Max, structural applications are now fair game. At over 14,000 PSI compressive strength, SculpWood Max is ready for your toughest job.
We developed The EndRot Kit as an easy way to purchase everything needed to perform a typical small repair all in one box. The kit includes: Borate Powder, RotFix, SculpWood Putty, and SculpWood Paste. Use the kit to restore window and door casings, porch posts, balusters etc.