Product Description

Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish without the usual "amine blush" associated with some epoxy resin films. Clear Coat contains no volatile solvents.

A two part epoxy coating and laminating resin for use in marine and woodworking applications. Use as a sealer, topcoat, or saturation coat.

  • Features a convenient 2:1 mixing ratio.
  • A clear, almost water-white, solvent-free epoxy system.
  • Cures to a clear, glossy, blush-free surface.
Size
$ 44.95
Mix Ratio by Volume100:50
Mix Ratio by Weight100:43
Total Solids100%
Mixed Viscosity400 cps
Minimum Application Temperature60°F (16°C)
Tensile Strength, psi7,800
Tensile Elongation at Break8%
Flexural Strength, psi12,000
Flexural Modulus, psi375,000
Compressive Strength, psiYield 13,000
Failure26,000
Coverage See Product Usage Estimations Chart
Gel Time @ 77°F (25°C)60 Minutes (100g mixture)
Gel Time @ 77°F (25°C) with 2% Turbo Cure30 Minutes (100g mixture)
Tack FreeTime Thin Film @ 77°F (25°C)48 Hours
Full Cure @ 77°F (25°C)72 Hours
Clear Coat is ideal for clear coating wood, and the wetting out of fiberglass cloth for bright finished boats. Use as a build coat for clear linear polyurethane or varnish coatings and as a penetrating first coat for blister repair on fiberglass boats. Use also for those applications that require a long pot life and low viscosity. Use Clear Coat as the sole epoxy system to make wood strip canoes and kayaks. Protect Clear Coat from moisture during cure to avoid water spotting.

Related Products