Sculpwood Putty

Product Description

SculpWood Putty is a two-component, solvent-free, kneadable epoxy. It is moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails.

  • Use to replace rotted or chipped away wood; cracks and other cosmetic defects in window and door sills, frames, railings, furniture, etc.
  • Will not shrink or become brittle after curing.
  • Features a convenient 1:1 mixing ratio.
  • Resin and hardener are easily mixed by hand.
  • Can be easily shaped and tooled: will not slump or sag. Once cured can be sanded, carved or machined.
  • Can be primed and painted to match an existing finish.
  • Once cured will hold fasteners, nails, screws, etc.
  • Part of the EndRot Wood Restoration System by System Three for permanent, non-structural repairs to rot and insect damaged architectural components.

Use SculpWood Putty for replacing missing sections of windowsills, frames and furniture or for adding new sections to existing structures.

SculpWood Putty & SculpWood Paste are the wood replacement components of The EndRot System. They are commonly used with System Three RotFix, a low viscosity wood sealer and consolidant.

$ 39.10
Mix Ratio by Volume100:100
Mix Ratio by Weight100:100
Total Solids1
Mixed Color Brown
Minimum Application Temperature 40°F (5°C)
Working Time @ 77°F (25°C) 60 Minutes (100g mixture)
Time to Sand (Block or Hand) 8 Hours / (Machine sand) 10 Hours

SDS Part A | SDS Part B


Technical Data Sheet


See our Rot Repair Project page for all the information you'll need for Rot Repair, including step-by-step video instruction.


Rotted Beam Repair


EndRot Brochure


Borate Rod Use Chart


Related Products